Continuous casting line for acrylic solid surface at the LISTACRYL plant in Kirishi, seen along the full length of the hall
Solid Surface · Kirishi, Russia

Acrylic solid surface,
cast in Russia

Cast sheet made from PMMA acrylic resin and aluminium trihydrate. Our own casting line runs at 100,000 m² (1.08 million sq ft) a year — plus ADC, a composite whose density is dialled in to suit the part.

Request samples About the material
Sheet 760 × 3660 mm Thickness 12 · 16 · 19 mm Composition PMMA + ATH Colour RAL
100,000m² of sheet a year —
rated capacity
7,500m² main hall
(80,700 sq ft)
3 haproduction site
(7.4 acres)
500+million ₽ invested
in the site
Orange control desks along the LISTACRYL sheet line, each governing one section of the conveyor
Control station for a curing section: identical desks stand along the whole line, each governing its own stretch of the tunnel
About the plant

Not a substitute for imports —
a line of our own

The plant was built in Kirishi, Leningrad Region. Three hectares of land, a 7,500 m² main hall and a private rail spur. Part of the equipment was engineered and manufactured inside the SAFIT group.

LISTACRYL is cast solid surface sheet for seamless worktops, sink areas, façades and interior elements. The material is homogeneous through its full thickness: colour and structure survive routing, sanding and surface repair.

The base is acrylic resin (PMMA) filled with aluminium trihydrate (ATH). That combination contains no styrene, does not yellow under UV and allows the surface to be restored completely by sanding.

An in-house laboratory sits on site: formulations are developed and verified here, together with Russian chemists. Mixing and dosing equipment — RESPECTA and AUTOCASTER — is engineered by SARMATECH.

Two materials

One sheet.
Two kinds of logic

Classic solid surface where the surface has to be flawless. ADC where weight is the constraint.

White acrylic solid surface sheet leaving the LISTACRYL casting line before calibration
Base material

Acrylic solid surface

Homogeneous, non-porous material on PMMA and ATH. Seamless bonding, thermoforming, full repairability.

1.78 g/cm³58 MPaMohs 4G2 · V2 · D2 · T2
Properties and fabrication →
Section of the LISTACRYL casting line with a control cabinet and roller table
Flagship line

ADC — adaptive density composite

Density is set to the job: light furniture carcasses, curved façades or load-bearing worktops.

900–1800 kg/m³38 kg instead of 6512 · 16 · 19 mm
How ADC works →
Furniture carcasses · 16 mm
Façades and curved parts · 19 mm
Worktops and loaded areas · 12 mm
80010001200140016001800 kg/m³
ALBELA solid surface bathtub with contour lighting in an interior — a product made from LISTACRYL material
The sheet in use

A bathroom brand within the same group. Basins, bathtubs and vanity tops are made from sheet and casting compound produced in Kirishi. It is our most demanding customer and the clearest test the material gets: deep draws, monolithic joints, and the way white stone carries light.

More about the project → albela.ru →
On the line

Lifting a finished sheet

56 seconds, no sound. A vacuum gantry lifts the sheet off the roller table and stacks it on a pallet. The clip does not loop — press to play, press again to replay.

Inside the plant →
Who is behind it

The companies
behind the sheet

Manufacturing entity: Khotkovskoe RTP LLC, site in Kirishi. Investor and parent structure: SAFIT Group. Mixing, dosing and casting equipment: SARMATECH. Finished products made from the material: ALBELA.

SAFIT Group SARMATECH ALBELA ADC Composite Khotkovskoe RTP
Work with us

Request samples
and supply terms

We send sheet samples, the current price list and technical documentation. Expect a reply within one business day.